Make Your Selection: HiMirror Skin Analyzing Beauty Mirror

Imagine having a personal beauty consultant in your home every day. More than just a mirror, the HiMirror device allows consumers to take measurements of their skin's complexion including roughness, wrinkles, fine lines, and pores through HiMirror Facial Analysis Engine, using the camera system and image analysis to help you address problem areas and move toward your beauty goals. Combined with a unique history tracking system that enables daily progress viewing, HiMirror is your very own at-home beauty consultant.

How do I use it: Take a photo using the HiMirror's built-in camera and receive your skin analysis results in a matter of seconds.

It is recommended that HiMirror be installed on an indoor mirrored surface, with multiple natural or artificial light sources. Have a light source in front of you and turn the other lights off.

To mount on a mirror, remove the backing from the adhesive and attach it to the large rectangle of the bracket, using the marks to align. The pink line on the cardboard assistor should be at eye level. Remove backing strip and stick cardboard on mirror. Remove remaining backing from the adhesive on the bracket. Use the rubber pressing tool to press firmly on each of the 12 square cells for three seconds. Wait 24 hours before mounting HiMirror on the bracket.

For wall mounting, the pink line on the cardboard assistor should be at eye level. For drywall or a wood wall, remove backing strip and stick cardboard on the wall. Screw bracket directly into wall. For a concrete wall, remove backing strip and stick cardboard on wall. Mark the three mounting holes on the wall. Remove cardboard.

To hang HiMirror, there are two square sliders on the bottom left and right edges of the bracket and two grooves toward the bottom of the mirror. Hold HiMirror firmly with both hands and position the sliders in the base of the groove and slide the mirror down gently. Use the cardboard assistor to confirm that the bracket is not tilted.