Brother DesignNCut Electronic Cutting Machine

Brother DesignNCut Electronic Cutting Machine
product thumbnail

or 2 Easy Pays of $100.00

+ S&H and tax Good until September 23, 2018 10:59 p.m. ET

Cut your crafts with ease using the Brother DesignNCut electronic cutting machine. It delivers precise cuts and is compatible with many media types--plus, it works with ScanNCut Canvas software (not included) so you can use your phone, tablet, or computer to choose or create patterns. From Brother.

  • Includes DesignNCut DC200B electronic cutting system, standard cut blade and holder, 12" x 12" standard mat, spatula, calibration sheet, power cord, and quick-reference guide
  • 112mm/s maximum cutting speed
  • Compatible with vinyl, paper, fabric, felt, foam, poster board, leather, and plastic
  • Compatible with ScanNCut Canvas software, not included
  • 0.99mm maximum media thickness
  • Measures approximately 19-1/2" x 7" x 5-3/4"
  • UL listed; 1-year Limited Manufacturer's Warranty
  • Imported

Delivery Date Estimate

Reviews & Community QA

Brother DesignNCut Electronic Cutting Machine is rated 2.0 out of 5 by 9.
Rated 4 out of 5 by from Happy but could be better I was disappointed to find out that the Creative Work space did not work with my Mac. However, I was able to use my I phone as a camera with Creative Work space when it was connected to the the PC and I was able to get Design N cut Manager on my phone. It took me 2 days to get my first cut. I think if I slowed down and read the instructions carefully it would've been easier. Now that it is working I am thrilled with the results! I realize the 2 problems I had. Number 1: make sure that ALL the software is downloaded correctly. Number 2: make sure the blade is inserted correctly. The gray lever needs to be down all the way and the blade needs to be Calibrated correctly.
Date published: 2018-08-30
Rated 2 out of 5 by from Hard to use Getting the pictures on the grid takes lots of patients. I actually had to prop my tablet up about 17 inches and it still takes about 3 tries to get a picture that is accepted by the program. But that's better than 20 tries that it took me the first 4 or 5 times. I don't use mine as much as I would like to.
Date published: 2018-08-18
Rated 1 out of 5 by from Hard to Use I had no trouble using the Scan n Cut 350 and so when I got this through a review program, I assumed it would be easy. Not on your life. I worked until I was exhausted. I never could get it to connect to either my computer with a cord or via our Wifi. A product to be used with a hobby shouldn't be this difficult and for the price, I would have been very upset if I had paid for this and then never was able to get it to work.
Date published: 2018-08-12
Rated 1 out of 5 by from who created this software? this thing is a nightmare to use, and I am a pretty tech savvy person.
Date published: 2018-07-05
Rated 1 out of 5 by from Don't waste your money This machine deffinetly is not easy to use. Infact it is down right difficult. I've only ever got mine to connect 1 time. All the other times i tryed it said it was connected & then when i go to send my project to the machine it says its not connected. Very agitating. I wish i never purchased this. It wasnt until right after i payed for it that i found out about the scan n cut. Totally wish i had gotten the scan n cut.
Date published: 2018-06-30
Rated 4 out of 5 by from I'm still learning The machine is not bad, there's a lot to learn. What I am having the most difficulty with is the capture matt. I only got it to work once. I watched severl videos several times & still it is not working for me. I am hoping you improve this function to make it more user friendly.
Date published: 2018-06-09
Rated 1 out of 5 by from Worst Product Ever They have no video or accessories to help you. I had to learn everything on my own. Save your money and don't buy. I can no longer connect wirelessly and have to use the computer. I wish I could get my money back . Since I'm stuck with the machine, I'm making videos of how to use it. https://youtu.be/X9lmiSSB8RE subscribe for more.
Date published: 2018-05-23
Rated 3 out of 5 by from Design N Cut Not Worth It This is a disappointment. It has templates that can be used but editing them is not easy. The type sets are difficult to join together, and the tutorials are not sufficient. For example, there is no available template for “Happy Mother’s Day”. The most disappointing feature is that Brother claims that you can take a picture of a simple object, like a stamped image, and upload and then cut out the shape. You can but you have to take a perfectly aligned picture that is nearly impossible. Not to mention the arduous calibration process, which requires a perfect picture as well. I spent numerous hours and used 3 different cameras and still have not been successful at cutting the outline of a stamped object. In fact I was only sucessful at calabrating one of the 3 cameras. For the price it makes a good shape cutter, but I would stick with the scan n cut model if I were to make purchase again.
Date published: 2018-05-05
  • y_2018, m_9, d_22, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_F250622, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_qvc