We're sorry. This item is not available at this time.
Pre Order Possible .
Frequently Asked Questions
Q: How do I change the sensitivity?
A: First, start by gliding your finger to form the letter "C" across the icons (labeled above). Use numbers 7, 6, 10, and 11—starting with 7 and ending with 11. The current sensitivity level will flash green. For example, when the icons numbered 5, 6, 7, and 8 flash green, then your unit is set at the medium sensitivity level.
After this, you're able to adjust the sensitivity level from high, medium, or low by pressing the "Seize Me" button. Continue to press the "Seize Me" button until the sensitivity level you want is lit up green. For example: after forming the letter "C", press the "Seize Me" button to change the sensitivity setting. If you want the sensitivity at low, continue to press the "Seize Me" button until icons 9-12 are all lit up green.
Please note that every time you turn the unit on, the default sensitivity setting is medium. If you want higher or lower sensitivity, you must change it every time the unit is turned on.
Q: How do I change the volume?
A: Every time you turn on the unit, the volume will be set on high. (This is the default.) To change the volume to low, hold the #3 icon for two seconds. To mute the volume, hold the #2 icon for two seconds.
Q: Does the FlashPad have any automatic default settings for volume and sensitivity?
A: Yes, the default setting for the volume is high, and the default setting for the sensitivity is medium. Every time you turn on the unit, the volume will automatically set to high and the sensitivity will automatically set to medium.
Q: How do I play a single-player game?
A: When you turn on the FlashPad unit, the bottom 8 icons will light up with 4 red icons numbered 13-16 in the first row (from the bottom up), and 4 green icons numbered 9-12 in the second row. The 4 red icons indicate single-player games. To play any of the 4 games, just touch the illuminated red icon for any of the 4 games ("Remember Me," "Twist Me," "Chase Me," and "Find Me").
Q: How do I play 2-player games?
A: When you turn on the FlashPad unit, the bottom 8 icons will light up with 4 red icons numbered 13-16 in the first row (from the bottom up), and 4 green icons numbered 9-12 in the second row. The 4 green icons indicate 2-player games. To play any of these 4 games, just touch the illuminated green icon for any of the 4 games ("Remember Me," "Twist Me," "Chase Me," and "Find Me").
Q: How do I know when it's the second player's turn?
A: After turning on the unit, touch the green icon next to the 2-player game you'd like to play. Once the game is selected, the unit will say "Player 1, Ready Go" and Player 1 will play until they lose. Then the unit will give the score for Player 1 and then say "Player 2, Ready Go." After Player 2's turn, the unit will call out the winner, their score, and a high score if either player achieves a high score.
Q: How do I play "Remember Me"?
A: Single Player: Touch the red #13 icon. You'll see one of any of the icons flash red; then touch whatever icon flashed red. Then you'll see the same first icon flash red, and a second, different icon, will flash red. Now you need to touch the first and then the second icon that flashed red. This pattern repeats. The game is all about remembering which red flashed first, second, third, fourth, and so on. You need to memorize the pattern. Play until you touch the incorrect icon. As you continue to play, green icons will appear. Don't touch or memorize the green-colored icons, because they pop up to throw you off track. You only want to touch or memorize the patterns of the icons that light up red.
Two Players: Touch the green #9 icon. The unit will say "Player 1, Ready Go," and Player 1 plays until he/she does not remember the pattern correctly. When Player 1 is done, the unit will say "Player 2, Ready Go."
Q: How do I play "Twist Me"?
A: Single Player: Touch the red #14 icon. Touch and hold the icons that light up yellow; they'll light up one at a time. Once you put your finger on one of the icons, the second, third, etc. icons will light up yellow. Continue twisting your fingers all over the board. As you continue to play, the number of yellow icons you have to touch and hold will increase.
Two Players: Touch and hold the green #10 icon. First you'll hear "Player 1, Ready Go." Player 1 will go first until Player 1 cannot keep up with the yellow icons. The game will clap and you'll hear "Player 2, Ready Go." Player 2 will play the same way. At the end of Player 2's turn, FlashPad will announce the winner of that round and if either player earned a high score.
Q: How do I play "Chase Me"?
A: Single Player: Touch and hold the red #15 icon. Touch every icon that lights up red. Do not touch the green icons; they just come up to trick you. As you proceed to play, more red and green icons will appear. You have to touch each red icon as quickly as you can or the time will run out.
Two Players: Touch and hold the green #11 icon. You'll hear "Player 1, Ready Go." Player 1 plays, first touching all the red icons as quickly as possible. When Player 1 is done, you'll hear "Player 2, Ready Go." Player 2 will also touch only red icons as quickly as possible. Once Player 2 is finished, the game will announce the winner and if a high score has been achieved.
Q: How do I play "Find Me"?
A: Single Player: Touch and hold the red #16 icon. All 16 icons will light up red. Go through all of them to find the bomb, which can be any of the 16 icons. Once you touch the red icon and it's not the bomb, it'll light up green. You want to have as many green icons illuminated to get the most points before finding the bomb. Once you find the bomb, you begin the game all over again.
Two Players: Touch and hold the green #12 icon. There are four stages for the 2-player version of this game. For the first stage, find 4 bombs; the second stage has 3 bombs to find; the third stage has 2 bombs; and the fourth stage has 1 bomb. In each stage, each player takes a turn to touch one of the red icons, one at a time, after one another, to find the bomb. The object of the game is to find the least amount of bomb. Whoever finds the most bombs loses. After the last stage, you'll hear the unit say, "The winner is XX."
Q: How do I play "Seize Me"?
A: Single Player: Press the "Seize Me" button in the upper-left hand corner to play this game. A light pattern of either red or green will start moving along all of the icons. Touch the icon that is the different color. For example, if all the icons are red but one icon is green, you want to touch the icon that is green, and vice versa. The colors and patterns will change as you continue to seize the different colored icons. This game has 4 stages. Once you complete each stage, you'll move to the next stage, and the patterns become more difficult. For example: After completing the first stage, icon #1 will light up and remain red for about 2-3 seconds. Once you complete the second stage, icons #1 and #2 will illuminate and remain red for about 2-3 seconds. This will continue until you beat all 4 stages.
Q: How do I clear/reset the high score memory?
A: Form the letter "S" beginning with the #3 icon and glide your finger across numbers 3, 2, 6, 7, 11, and 10. 10 is the last icon you'll touch to form the letter "S." All 16 icons will flash red three times. Go back to the game selection mode and you'll see that the memory has been completely deleted.
Q: How can I check the high score for each game?
A: To check the high score of a specific game, touch and hold the specific game you want to check and the "Seize Me" button at the same time for 3 seconds. You'll hear "High score XXX" for the specific game you selected. To check the high score for "Seize Me," press the "Seize Me" button for 3 seconds. You'll then hear the high score of this game.
Information provided by Toy Element Company Limited.