We're sorry. This item is not available at this time.
Pre Order Possible .
Q: How often do I need to recharge my 700 Peak AMP jump starter?
A: You should recharge your jump starter 24–48 hours immediately after purchase and after every use. It's also recommended to recharge every 30–60 days for approximately 12 hours, or until the battery status indicators show full when it is not in use.
Q: How do I recharge my jump starter?
A: Simply connect a household extension cord into the AC charging adapter on the unit to begin charging. Unplug the extension cord when the charging indicator LED is solid green or blinking green.
Q: How do I know when my jump starter is fully charged?
A: Your unit is fully charged when all LED indicators illuminate and the green LED is lit or flashing.
Q: What happens if I connect my jump starter up backwards/reverse?
A: It's very important to review the safety warnings in the instruction manual before you use your jump starter. Be advised that your jump starter should be in the "OFF" position when first connecting it to the battery.
If you connect the power station incorrectly, you'll hear an audible reverse polarity alarm and see a visual indicator. Disconnect the jump starter immediately. Reversing the polarity of a jump starter that is in the "ON" position upon connection may cause irreparable damage and will void the product warranty.
Q: What's the difference between a jump starter and a battery charger?
A: A jump starter is a product with an internal portable battery and with attached jumper cables. It must be recharged after each use. It can boost a vehicle without the need of another vehicle or being plugged into household AC power. Conversely, a battery charger has no battery and must be plugged into household AC power to function.
Q: Why don't the LED indicators illuminate when I press the battery status button?
A: You may need to press the battery status button for several seconds to display the battery status indication. Further, if the jump starter has not been properly maintained and is completely depleted, the indicator lights may not illuminate.
Q: Why isn't there any output to the clamps?
A: The power switch must be turned "ON." This jump starter has several safety features, including an "ON/OFF" power switch that helps to prevent sparking or arching until a proper connection is established.
Always refer to the instruction manual that came with this product for detailed instructions.
Information provided by Black & Decker.